Español
All the products you need to
Industrial cement and concrete floors have special requirements due to their high porosity
Due to its special characteristics, it is essential to clean and vacuum industrial floors very well before painting. It is very important that the floor is completely dry, especially if it is new construction, in which case you have to wait at least 25 days before painting so that it is completely dry.
The best paints for this type of flooring are epoxy and polyurethane types. 2 or more coats are usually applied to obtain a perfect result.
After taping the edges with masking tape or Kraft paper tape, proceed to trim with a Blue stripe mini roller made of textured polyamide for floors.
Recommended products
Extruded aluminium extension poles
For painting with all types of rollers and brushes 2 or 3 piece telescopic extension pole Extruded aluminium shaft Pressure-locking fixed head Compatible with all rollers and brushes For high quality, professional use
Fabric mini rollers D17
For maritime use and floors 10 mm textured Polyamide fabric for superior resistance Rounded end avoids marks when painting Thermofusion production For professional use
Fabric mini rollers D30 MIDIUM
For maritime use, floors and tiles 10 mm textured Polyamide fabric for superior resistance Rounded end avoids marks when painting Thermofusion production For professional use
Variable length floor rollers
Extendible Adjustable aluminium attachment for extendible rollers Ergonomic handle Roller for professional use
Variable length floor rollers
For floors and tiles, suitable for use with epoxies, resins and chlorinated rubber paints 13 mm Textured Polyamide fabric for a good finish on floors Thermofusion seamless production Roller for professional use
Variable length floor rollers
For floors and tiles, suitable for use with epoxies, resins and chlorinated rubber paints 11 mm Textured Polyamide fabric for a perfect finish on floors Thermofusion seamless production Roller for professional use
Professional laminating rollers
For removing bubbles, suitable for use with polyester resins and fibreglass Made with Polyethylene For maritime use and floors Roller for professional use
Fixed length floor rollers
For floors and tiles, suitable for use with epoxies, resins and chlorinated rubber paints 13 mm Textured Polyamide fabric for a good finish on floors Thermofusion seamless production Roller for professional use
Fixed length floor rollers
For floors and tiles, suitable for use with epoxies, resins and chlorinated rubber paints 11 mm Textured Polyamide fabric for a perfect finish on floors Thermofusion seamless production Roller for professional use
Frames for mini rollers D17 and D30
For D17 and D30 mini rollers from 10-11 cm 6 mm galvanised redrawn steel frame Anatomical plastic handle For professional use
Frames for mini rollers D17 and D30
For D17 and D30 mini rollers from 15-16 cm 6 mm galvanised redrawn steel frame Anatomical plastic handle For professional use
Frames for mini rollers D17 and D30
For D17 and D30 mini rollers from 10-16 cm 6 mm galvanised redrawn steel frame Anatomical plastic handle For professional use